PSA: saw three bikes at the Portland swap meet with cracked steerer tubes from over-tightened stems, please check your torque | Bicycle Mechanics - Pinecone Attack
PSA: saw three bikes at the Portland swap meet with cracked steerer tubes from over-tightened stems, please check your torque
Was walking the swap meet out at the Portland expo lot last Sunday and stopped at a guy's table because he had a nice older steel frame laid out. Started poking at the headset and noticed the stem clamp was cranked down way past spec, and when I looked closer there was a hairline crack starting right at the top of the steerer. Then I checked two more bikes on the same table and both had the same issue, all three from the same seller who kept saying they were just fine. I'm not trying to call anyone out here but those were being sold as ready to ride and someone was going to get hurt. It comes down to people tightening stems by feel instead of with a torque wrench, and 5 Nm on a lot of these alloy steerers turns into 9 or 10 real quick. The scary part is the crack stays hidden under the stem clamp until the thing lets go on a curb drop. If you're buying used, pull the stem and shine a light down the steerer before you hand over cash. What's your go-to way to check a used frame without tearing the whole front end apart?