Spent 3 hours on a 20 minute damper job because of one stuck pin
Pulled up to a rental in Akron on Saturday morning, dropped a rod down the flue, hit a throat damper that would not budge. I figured it was rusted shut and gave it a good yank. Nope, some previous owner had drilled a pin straight through the frame and into the plate. Took me two more trips to the truck for the right punch and a mirror before I even saw the thing, because it was tucked behind the frame plate. Ended up cutting it out with a hacksaw blade by hand since the sawzall would not fit. What should have been a 20 minute clean ran 3 hours and I made it to my next stop 40 minutes late. How are you all handling pinned dampers without tearing half the firebox apart?