Shoutout to the 2 foot jumper wire that beat my $600 cable tester
I spent almost a whole shift last Tuesday chasing an open on a pitot heat circuit in a Cessna 172, and my fancy cable tester kept showing continuity everywhere. Out of ideas, I grabbed a 2 foot scrap of 20 gauge wire with alligator clips on both ends from the bench drawer and clipped it straight from the breaker to the heat element. The thing fired right up, which told me the break was in that dirty cannon plug I had already wiggled and called good. Turns out pin 3 was barely crimped from the factory in 2003 and my tester was reading through the salt and grime. Now I keep that jumper in my shirt pocket and do the dumbest test first, every time. Anybody else got a cheap trick that makes the expensive gear look silly?