Why does nobody talk about how long a simple bathroom faucet swap takes when the shutoff valve is stuck
Honestly I thought swapping the faucet in our hall bath off Eubank would be a 45 minute job on a Saturday. The old shutoff under the sink wouldn't budge at all, and I ended up shutting off the whole house and cutting the valve out. Then the pipe stub was too short for the new valve, so it was a trip to the hardware store on Montgomery for a SharkBite and a pipe cutter. All told it took me 4 and a half hours and two store runs to do what should have been a quick swap. My neighbor says just replace every old valve before you start a project, my brother in law says run them once a year and leave them alone. Which side are you on, and has a stuck valve ever blown up your whole weekend plan?
Four and a half hours and two store runs for a faucet is the most honest thing I've read today. My last "quick" valve job turned into a soldering lesson at 9pm because the old gate valve snapped off in my hand.
I'm on your neighbor's side now. Replace the valve before it replaces your Saturday. Running them once a year sounds smart until the handle snaps off in your hand.